Unbeatable value and the best price in the market! Increased ground clearance Lower control arms feature high clearance design Extreme travel long arms keep optimum alignment and give optimum articulation. X-Flex control arm features: Clevite brand OEM style rubber bushings. Flex joints feature a massive 2.5" diameter body and 1.25" thread. Fully greasable. Upper joints pivot up to 20 degrees. Lower joints pivot up to 35 degrees.

Allows you to use the strength of a tree root system as an anchor, and use the trunk protector as a rigging strap to secure winch straps and D-rings. Safely protects the tree and environment while utilizing the accessability of nature to provide leverasge and a winching anchor when available. Reinforced Closed-loop ends provide strong and easy hook up positions for hooks, D-rings and accessories. Can be used in a variety of recovery uses as a tow strap, winch extension strap, or tree saver. Safely handles heavy loads up to 20,000 pounds when used properly. The 2" wide, x 8' long strap is strong and safe and can withstand extreme elements. 1 Year Limited Warranty

A complete High-Powered LED Fog Light replacement for the SPORT and SPORT S model Jeep Gladiator and Wrangler JL. This direct-fit fog light features plug-and-play wiring for easy installation. These amazing LED units push out approximately 3000 raw lumens which is guaranteed to light up the night on road or off road! This rugged design can operate in the worst possible conditions. Each light utilizes a rugged Polycarbonate lamp housing to withstand impact and a Solid-State luminaire design for vibration resistance. The epoxy-sealed electronics avoid moisture and corrosion. Perfect for the off-road adventurer who wants to cover new ground on the trail that never ends.

The MagnaFlow Jeep Loop Delete 19211 is a 2in. diameter mandrel bent stainless steel pipe that i's weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

Bikini Tops are the perfect companion to top-off, doors-off open air rides on the trails or just around town. This Bikini...

Low profile light mounts do not affect driver’s line of sight • Constructed of 3/16” cold rolled steel • Easy installation with no cutting or drilling • Limited Lifetime warranty on materials and construction • 5 year warranty on the Textured Black Finish • Light mounts only. LED lights not included *Not compatible with Go Rhino XPLOR Sixline LED lights

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19437 brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19437 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19437 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The Gladiator JT Mojave was designed with a courageous target of earning a Desert Rated badge. The Mojave's Desert Rated is equipped for runaway freedom and only gets better with bigger tires and more ground clearance. Outfit your Gladiator Mojave to reflect your bold, adventurous personality and open-air driving lifestyle. Enhance your personal style with space for 35s to increase ground clearance with this cost-effective option. This small suspension lift makes a big difference and rides like it is not even there by retaining your Jeep engineered coil springs, special internal-bypass shocks, hydraulic jounce bumpers and other distinctive Mojave features. The strong tab and slot interlocked integrity of the Front and Rear 1-Piece Coil Spring Spacers delivers a strong, long-lasting product. These spacers raise the Jeep's front by 2.50 inches and rear by 1.00 in. to gain a more level stance and function perfectly with the Jeep Gladiator's factory coil springs. Front 2 in. Bump Stop Spacers bolt onto the axle bump pad and retains the OEM function of the hydraulic jounce bumpers. Front and Rear Shock Extension Relocation Brackets reposition your factory remote-reservoir shocks. Extended Length Front Sway Bar End Links allow full articulation as the suspension drops (full droop). The front end links include Skyjacker installed pressed-in HD OEM style rubber bushings and Zinc plated for corrosion protection. Expert craftsmanship in every component of the kit. All the metal fabricated bracketry is meticulously engineered with steel metal construction (0.1875mm - 3/16 in.) and precise CNC laser cut and precision formed in CNC press break. Proper suspension geometry ensures the Electronic Stability Control (ESC) system functions within factory parameters. Complete with All Bushings & High-Grade Mounting Hardware. Easy Straightforward Installation with Step-By-Step Instructions. NOTE: ONLY Fits Jeep JT Gladiator Mojave Models.

The Rock Krawler Suspension JL Wrangler 2.5 inch Ultimate Adventure Mid-Arm System is specifically designed for Wrangler owners who want a complete system, bolt-in installation, and some of the best articulation of any MID-ARM kit on the market. Our system proves its durability and off-road performance every time you hits the streets or trail! The Term, "Ultimate Adventure System" comes from the inclusion of 4 non-adjustable Lower control and 4 fully adjustable upper arms with our 100% Service Free Adventure Series joints installed. Our industry leading, Adventure series mid-Arms offer a total of 70 degrees of misalignment when paired with our Adventure series Joints at the frame connection and at the axle. The inherent bind in a factory JL/JT control arm is greatly reduced. Driving you home with the most comfortable ride possible in a Wrangler, are our TRIPLE RATE front and rear coils. All 4 coils work together to achieve excellent on-road comfort that we feel is better than the OEM springs. The coil itself is built with the proper "Free-length" for off-road articulation and stays firmly seated in the coil bucket (as long as a proper length shock is installed), and overall, a very controlled reaction to bumps, rocks, sand, mud and whatever else you can manage to throw at them! All Rock Krawler JL systems include correction pads that reduce the spring bow inherent in the factory set up. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on road handling.

EVO MFG JEEP Wrangler JL/JLU Heavy Duty Hinged Spare Tire Carrier The JL factory tire carrier and tailgate was never intended to handle the loads associated with larger, heavier wheel and tire combinations. Many aftermarket tire carriers address this issue, but are complicated to install, require an aftermarket bumper, and add multiple processes to open your tailgate. The EVO MFG JL HD Hinged Tire Carrier is a body mounted tire carrier designed to allow you to carry up to a 40” tire while retaining your vehicle’s one handed easy access to the rear cargo area. Its design is tough enough to handle the stresses associated with larger tires and simple enough to keep all the functionality your factory tailgate already has in a simple easy to install and operate package. The EVO MFG JL HD Hinged Tire Carrier is engineered for strength and durability. It’s made from 3/16” and 3/8" steel that’s been laser cut, CNC press brake formed, and fully fixture welded. In the factory configuration, the wheel and tire load is transferred through the tailgate to the door hinges. Knowing that this is the weak link, the Tire Carrier is designed to bypass the tailgate and transfer the heavier wheel and tire load directly to the hinges. The hinge brackets are made from the same 3/16 and 3/8" steel and are gusseted for strength with integrated bump stops that stop the weight of tailgate and tire when it’s fully opened. Jeep Wrangler JL Tire Carrier for 35 inch tire The EVO MFG JL HD Hinged Tire Carrier’s mounting points are designed to work with your JL by transferring loads to the JL’s body in a location that is reinforced from the factory with multiple layers of strong, stamped, internal, steel gussets. The simple design keeps a low profile that fits the contours of the vehicle and carries the tire close to the body. Once installed, the tailgate will operate as before, maintaining the factory catch and the easy one handed opening, while the beefy hinge hardware swings smoothly with the added weight of a larger tire. Jeep Wrangler Tire Carrier for 37 inch tire The tire mounting position is engineered to be adjustable in movement up and down as well as in and out. This ensures your tire will fit properly, won’t rattle, and gives you departure angle and rear window visibility options. The EVO MFG JL HD Hinged Tire Carrier includes an integrated antenna mount. Install is simple and can be done with a basic tool set by any installer. It’s all bolt-on with no drilling or cutting needed. Wheel mount on tire carrier comes in stock 5on5 pattern with studs. Wheel mounts is pre drilled to covert by installer to 8on6.5 for aftermarket (Dana 60/70/80) axle wheel patterns Compatible with Factory Rear Reverse Camera and 3rd brakelight INSTALLATION TIME 2-3 HOURS All Jeep Wrangler 2018+ Compatible Image may differ from actual product Factory 3rd Brakelight is retained with this tire carrier

Polyurethane Spacer Kit; Front; 3/4 in. Lift; Pair;

The XLF Windshield Light Frame for the Jeep Wrangler JK allows you to choose windshield frames with a variety of lighting configurations. Heavy duty uprights mount directly to the JK's A-pillar while the unique side-to-side lateral rack design increases stability and reduces vibration. Fits 50" Light Bar (sold separately).

Where precision engineering meets the dirt. Presenting the Best Sounding Exhausts on the Planet™ for the JK/JKU Wrangler: Axle-backs, mid pipes, loop replacement pipes, and crawler configurations -- modular options for all Handcrafted from 3” and 2.5” U.S.-made CNC mandrel-bent...

SeaSucker, the Official Bike Rack Supplier of the UCI World Championships, is proud to feature the Rainbow Stripes Edition of our ever-popular Talon rack for 1 bike. The Talon is our workhorse 1-bike carrier and our best seller. It’s a fork-mount-style rack featuring our always-up-to-date HUSKE Fork Mount. Three of our powerful (210lb pull-strength rated each) vacuum cups hold it securely on your car’s roof, trunk or back glass. Small and light enough to fit into a bike bag or carry-on luggage for you adventurous types who travel with your bikes. Probably the easiest rack in the world to install, and removes in just seconds, all without marking your car. Fits on virtually any car.

The MagnaFlow 2007-2011 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 17120 brings additional off-roading prowess and our deep signature exhaust note to your 3.8L 2007-2011 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17120 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17120's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17120 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

Daystar Comfort Ride Leveling Kits are designed to level the front your vehicle to the back eliminator the akward forward cant on stock vehicles. This levleing kit is designed for the 2018-Pres Jeep Wrangler JL and includes heavy-duty, progressive-rate, polyurethane spacers. These durable spacers lift the front of your Jeep leveling it's stance while maintaining the stock factory ride quality. All Daystar Comfort Ride Lift and Leveling Kits are backed with a lifetime, no questions asked, Go Everywhere Warranty. Engineered to level your vehicle 3/4 inch No stud cut design for an easy, 1-2 hour install Manufactured from high-density, progressive, polyurethane Levels vehicle without sacrificing ride quality or load carrying capacity Made in the USA with Daystar€s Go Everywhere Warranty Material: Polyurethane Color: Black Sold As: Kit

The REACT offers fully customizable control over your vehicles throttle response. The simple control knob allows you to switch between multiple modes and control the throttle intensity of each mode on-the-fly. The REACT installs easily and is completely plug-and-play, has an automatic setup sequence so no disassembly is required, comes with a magnetic A/C vent mount (Pedestal swivel mount also available - Sold separately), and doesnt void your factory warranty. Plus the REACT is internet updateable. Three (3) versions of the REACT throttle optimizer are available to fit your particular driving needs...Performance, Off-Road, and Tow.

The Rock Krawler Suspension JL Wrangler 2.5 inch Adventure - X Mid-Arm System is specifically designed for Sport and Sahara owners who want a complete system, bolt-in installation, and the best articulation of any MID-ARM kit on the market. Our system proves its durability and off-road performance every time you hits the streets or trail! The Term, Adventure - X comes from the inclusion of 8 adjustable control arms with our 100% Service Free Adventure Series joints installed. Our industry leading, Adventure - X mid-Arms feature adjustable upper and lower control arms and offer a total of 70 degrees of misalignment when paired with our Adventure series Joints at the frame connection and at the axle. The inherent bind in a factory JL control arm is greatly reduced. With so much adjustability, it allows you to precision tune the JL's caster and pinion angle front and rear. Driving you home with the most comfortable ride possible in a Wrangler, are our TRIPLE RATE coils. All 4 coils work together to achieve excellent on-road comfort that we feel is better than the OEM linear rate springs. The coil itself is built with the proper "Free-length" for off-road articulation and stays firmly seated in the coil bucket (as long as a proper length shock is installed), and overall a very controlled reaction to bumps, rocks, sand, mud and whatever else you can manage to throw at them! All Rock Krawler JL systems include correction pads that reduce the spring bow inherent in the factory set up. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on road handling.

Introducing the Morimoto XB LED headlights for the 14-22 Jeep Grand Cherokee—an exceptional upgrade for your vehicle's lighting system. These headlights feature triple Bi-LED projectors, delivering a total of 6x low beams and 6x high beams for unparalleled illumination. Their modern optics and uniquely shaped projector lenses ensure not only a sleek appearance but also superior performance, exceeding SAE and DOT standards when properly aimed. The Morimoto XB LEDs come with striking sequential LED turn signals, adding both style and safety to your ride. The LED daytime running lights, powered by Osram 5000K LEDs, are exceptionally bright and dim down when necessary, complying with regulations. The UV-coated polycarbonate lens, PPS plastic housing, and die-cast aluminum heat-sinks make these headlights not only aesthetically pleasing but also durable, promising a long-lasting and stylish upgrade for your Jeep. Plus, they're designed for easy installation, compatible with various Grand Cherokee models, including OEM Halogen and Bi-Xenon setups.

Replacement Roller Fairlead for Tiger Shark 13500/15500/17500 Winches

• Die formed 16 gauge steel step plate • Protects vehicle rocker panels from potential damage • 2" diameter .120" thick wall tube • Mount directly to vehicle frame • Coarse texture coated step area for slip resistance • Welded support plate with laser-cut Westin logo • Available for 2 and 4 door • No drilling required

DUAL RATE-LONG TRAVEL coil springs expand during articulation as suspension droops to keep the tires in contact with the ground much longer than a single rate resulting in a smoother ride while maintaining the coil in the upper coil bucket even at full droop. The 2nd rate (lower coils) only engage after compression past the 1st rate for consistent control and stability during body roll and heavy off-road suspension movement. Kit includes Front Dual Rate Long Travel Coil Springs, Rear Add A Leafs, Front and Rear Black Max Shocks.

Heavy duty vinyl type material with lead free weight, interior accessory pockets, and hook & loop fasteners. 19.5in x 16.75in with white Superwinch logo

Fits 1984-2001 Jeep Cherokee XJ Black textured powder coat 3/16in. steel construction 2in. diameter raised tube winch guard Recessed winch mount Includes Grade 8 Mounting Hardware Power cable access holes for winch Includes (2) d-rings Gear up your 1984-2001 XJ Cherokee for any trail with the indomitable Fishbone Offroad Bullhead Front Bumper. Crafted with precision and passion, this bumper showcases rugged durability wrapped in an aesthetically pleasing design. Constructed from formidable 3/16” steel and shielded with a resilient textured black powder coat, this bumper promises both sturdiness and style. The added 2” diameter Grille Guard is not just a cosmetic accessory; it acts as the guardian of your winch, standing tall against trail challenges. A winch installation has never been neater, thanks to the dedicated power cable access holes. Strength is in the details: With extended mounting plates and the inclusion of Grade 8 hardware, the Bullhead Front Bumper offers maximum strength and durability. And, for those unplanned trail mishaps, you have 2 D-rings at your disposal, ensuring you’re never stuck. What really makes the Bullhead Front Bumper stand out is the magic woven by our Fishbone engineering squad. They don't just design; they sculpt. Using the cutting-edge Scanner Solutions and CAD Software, they map every inch, every curve of your Jeep and Truck, ensuring a fit that feels like a second skin. It’s more than just compatibility; it's about complementing the innate spirit of your vehicle. Every product is a testament to our mission: unparalleled fitment, ease of installation, unmatched aesthetics, and impeccable integration with OE accessories. In a world of generic choices, Fishbone Offroad promises distinction. With a legacy that spans over a decade, our engineering acumen is not just about expertise; it's about evolution. We don’t just tread the waters; we make waves👋(Got the hint, Jeepers? 😉). Elevate your Jeep’s trail game. Choose Fishbone, where every journey becomes a statement. Installation Instructions Downloadable PDF: FB22060 Installation Instructions

The EVO MFG Rock Skins are side armor plates are laser cut from 3/16 steel and CNC bent. They are a bolt on installation with stainless steel hardware. These can be used with all factory Jeep sliders and steps as well as all aftermarket frame mounted rock sliders. The Rock Skins protection contours around stock and aftermarket fenders (factory mounting location). This will give the side of your Jeep secondary protection against damage of rocks and sliders pushing into the body. They are available for 2 Door and 4 Door Model JK’s. Each kit, 2 Door or 4 Door comes with both driver side and passenger side rock skin and all mounting hardware. All EVO MFG products are proudly Made in the U.S.A. *Drilling into body required INSTALLATION TIME 2-4 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-1048-2D.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Complete set of patented, made-in-the-USA, rebuildable, Dynatrac HD Balljoints™ for 2007-2018 Jeep Wrangler JK and 1999-2004 Jeep Grand Cherokee (WJ). Fits stock front axle or Dynatrac ProRock 44™ for Jeep JK applications. Dynatrac HD BallJoints are the strongest, most durable and highest quality available anywhere, featuring heat-treated high-strength billet bodies with chromoly stems. The heat-treated, precision-ground stainless steel ball meets military specifications. Unique seals prevent contamination, and the ball joints have greasable fittings and Teflon-coated wear points to provide a long, durable life. Dynatrac HD BallJoints are rebuildable -- they can be rebuilt on the vehicle with common hand tools.

The MagnaFlow 2007-2011 Jeep Wrangler Rock Crawler Series Cat-Back Performance Exhaust System 15238 brings superior boulder-climbing capabilities to your 3.8L 2007-2011 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15238 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15238's emissions-legal cat-back design replaces all your rig's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15238 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

On the Wrangler TJ, coil springs and shocks are primary determining factors in ride quality and suspension performance. Skyjacker's legendary Softride technology engineered processes achieve maximum wheel travel, ride quality and extends the long-lasting life of the spring. The process starts with hot wound 5160 material, a presetting process and advanced method of shot peening. Compressing the spring completely down to where the coils touch (solid height) is preset. This takes any fatigue or stress off the spring and eliminates sagging. Each coil spring is blasted (shot peen) with hard steel pellets at very high velocities. Shot peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Front Rear Bump Stop Spacers bolt in between the upper frame and OEM bump stops. Correct bump keeps the suspension travel safely in check. Rear Track Bar Lower Axle Mount Bracket mounts directly to the rear axle housing to correct the track bar angle. This re-centers the rear axle and improves suspension handling. The track bar bracket creates better handling and a lower roll center. Lower roll center means less side-to-side sway. Eccentric alignment cam bolts correct caster and pinion angles (front lower axle and rear upper front). Works with OEM Electronic Stability Control (ESC) System. Comes complete with Bushings and High-Grade Mounting Hardware.

Fits 1976-1986 Jeep CJ Fits 1981-1986 Jeep SJ Scrambler Fits 1987-1995 Jeep YJ Wrangler Fits 1997-2006 Jeep TJ Wrangler Fits 2004-2006 Jeep LJ Wrangler All Aluminum construction Textured Black powder coat. Includes all screws and spacers. Sold as a pair. Crafted from durable aluminum and finished with a textured black powder coat, these covers offer both robust construction and a sleek, high-quality appearance. The Fishbone mascot is laser-cut into the covers, giving your Jeep a unique and aggressive look. Additionally, when the brake is applied, these covers illuminate, adding an eye-catching element to your vehicle's rear end. The package includes all the screws and spacers required for easy installation, and the covers are sold as a pair. Elevate your Jeep's style and enjoy the added flair of these Fishbone Offroad Taillight Covers.

Low profile light mounts do not affect driver’s line of sight • Constructed of 3/16” cold rolled steel • Limited Lifetime warranty on materials and construction • 5 year warranty on the Textured Black Finish • Easy installation with no cutting or drilling • Light mounts only. LED lights not included

2" x 30' — The Extreme Bubba Power Stretch™ recovery rope is ideal for safely recovering heavy-duty vehicles such as tractors, semis and dump trucks from sticky situations! Extreme Bubba comes with a special velcro web strap for handy carrying. Extreme now comes with a Extreme Bubba gear bag (32" x 12" x 16"). Length is determined before rope is under load.

Fits 2007-2018 Jeep Wrangler JK Fits 2007-2018 Jeep Wrangler Unlimited JKU Fits 2018-Up Jeep Wrangler JL Fits 2018-Current Jeep Wrangler Unlimited JLU Fits 2020-Up Jeep Gladiator JT Installs onto your outer door hinges Sold individually Black 2 Stage Powder coated, cold-rolled steel Stainless-Steel hardware and bottle opener Spiked foot placement for extra traction Easy installation Taking on the great outdoors often requires a mix of utility and convenience. This step, designed for Overlanders and trail enthusiasts, is a testimony to that. Roof-mounted equipment is a common sight among off-roading aficionados, whether it's sports racks, storage bins, tents, or other utilities. But accessing these utilities can often become an awkward task. That's where our step comes into play. Designed for functionality, this compact step provides you with that much-needed boost to comfortably access your roof-mounted gear. Forget about the hassles of step sliders, the clumsiness of step stools, or those risky balancing acts you perform on the wheels. This step is easy to use, folding and unfolding as per your requirements, ensuring that you always have a sturdy platform to stand on. Plus, its compact design ensures that it won't be a snag point for trees and plants as you venture into the heart of the wilderness. Now, every seasoned trail rider knows that after a long, exhilarating day of tackling challenging terrains, there's nothing like winding down with a cold drink. To ensure you don't need an extra tool to pop that bottle open, we've ingeniously integrated a bottle opener into the design. Convenience, after all, is in the details. But crafting a product that's both functional and aesthetically appealing requires a blend of expertise and passion. And that's precisely what our Fishbone Offroad engineering team brings to the table. They harness the power of advanced Scanner Solutions and CAD Software to ensure that the design matches the contours of various Jeep and Truck models perfectly. This precision-driven approach guarantees not just a perfect fit but also ease of installation. At Fishbone Offroad, our vision is clear: deliver products that stand out in fitment, aesthetics, and compatibility with OE accessories. With every product we introduce, we aim to challenge market norms and raise the standards. Our track record, boasting over a decade of engineering brilliance, underscores our commitment to this vision. In the world of off-roading, while the journey is the reward, the tools and accessories you choose can make a world of difference. And with Fishbone Offroad by your side, you're not just making a choice; you're making a statement. Ready to step up your game? Join the wave! Jeep Wave! Installation Instructions Downloadable PDF - FB21237 Installation Instructions California Residents: Prop 65 Warning

The Jeep Wrangler is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Wrangler has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low-hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allows you to not only improve your approach and departure angles but also improve performance and completely change the sound of your JL! SES5005MD is the newest muffler delete kit from Injen Technology. This muffler delete system is designed specifically for the 2018-2023 Jeep Wrangler JL equipped with either the V6-3.6L or the L4-2.0L Turbo engines. The SES5005MD muffler delete is a fantastic solution for those that want to climb those steeper obstacles without breaking the bank on a high-tuck exhaust. In fact, you can easily swap over to this muffler delete for the weekend wheeling trips and then reinstall your OE muffler for your weekly commute, all within 20 minutes. This isn’t a cheap delete kit made from thin cold-rolled steel that will either rust or crack, the Injen Muffler Delete kit is made of 304 stainless steel that is mandrel bent right here in Pomona, CA for durable, long-lasting performance. During the design process, our engineers made sure that the installation was as simple as possible and retained the use of the factory hanger locations. This allows for quick swaps without throwing any wrenches in frustration! As always, the SES5005MD muffler delete works seamlessly with our full line of Jeep performance products. From Rotomolded air intakes to throttle response controllers to complete performance exhaust systems, Injen Technology is here to help you take on the world in your Jeep!

Give your Jeep Wrangler JL a new, stylish LED accent with our Universal Pre-Runner Style LED Grill Light Kit. Add 3x LED marker lights to the front grill of your without any cutting or drilling; these simply install into the holes of the grill. The wiring harness reduces installation time by using a plug-and-play system with offset cable lengths to make cable management easier.

EVO 07-11 JK EVO Long Arm Compatible Protek Skid System Complete Kit (Manual Trans) Kit includes: EVO-1101B EVO MFG 2007-2011 JK ProTek Oil Pan Skid ¼” Steel skid fully boxed for protection on all sides, 100% Bolt on with Factory Hardware, Accessible oil drain without removing skid. EVO-1104B EVO MFG 2007-2012 Transmission Skid (Manual) BLK 3/16” Steel skid 100% Bolt-on with supplied hardware Powder coated black EVO- 1093LAB EVO MFG 07+ TransCross-member Exhaust Skid, (EVO Long Arm Compatible) Fits all year JKs. The 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012+ JKs, Protects the expensive to replace factory transmission cross-member or can be used with EVO-1144 / EVO-1145 HD Crossmember, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black. Compatible with EVO Long Arm Suspensions.

Elevate your driving experience to new heights with the Stinger HEIGH10 10” Radio Kit, designed for Jeep Wrangler JK owners who appreciate the finer things in life. Immerse yourself in luxury as this advanced kit enhances visibility and ergonomics. Seamlessly integrate your smartphone with Apple CarPlay and Android Auto (wired connection), accessing map navigation, phone contacts, notifications, and more! Stream music and make handsfree calls with the 10" high-definition touchscreen and Bluetooth functionality. Safety is key, so the HEIGH10 radio boasts multiple camera inputs to eliminate blind spots, reducing risk and ensuring a smooth ride. Get to your destination effortlessly with the integrated GPS navigation that functions even in areas with limited data or no cell phone coverage. With every detail considered, the Stinger HEIGH10 Kit is the ultimate upgrade, packaged with everything you need for installation!

The MagnaFlow 1991-1995 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 17126 brings additional off-roading prowess and our deep signature exhaust note to your 2.5L, 4.0L 1991-1995 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17126 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17126's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17126 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

Dynatrac Rebuildable HD Balljoints for 2018-Present Jeep Wrangler JL and 2020-Present Jeep Gladiator JT solve wear and excessive movement issues that can lead to increased tire wear, loose steering feel and decreased stability. With larger tires, factory balljoints can develop excessive play and movement in as little as 20,000 miles. Watch this video that shows the wear in an OEM balljoint from a Jeep JL with 35-inch tall tires and 20,000 miles:

Rough Country wants everyone to enjoy the same off-road lifestyle, so we offer top-notch components at an incredible price and back it up with the best service in the business. We're helping EVEN MORE Jeeps take the road less traveled. Easy bolt-on installation. Maintains factory ride quality.

Fits 2018-Current Jeep JL Wrangler Fits 2018-Current Jeep JLU Wrangler Unlimited Black textured powder coat Steel and Aluminum construction Designed to mount over OEM Tail Lights. Not compatible with the stock LED package Enhance the rugged protection of your Jeep with the Fishbone Offroad JL Tail Light Guards, designed to fit 2018 to Current JL Wrangler, Rubicon, and Unlimited models. Constructed from a blend of durable steel and aluminum, these tail light guards are a stylish solution to safeguarding your JL's rear lights. These guards are designed to easily mount over your OEM tail lights, offering a robust shield that defends against the hazards of off-roading, including menacing trees, rocks, and the occasional encounter with less-than-attentive drivers. While providing superior protection, these tail light guards also make a bold style statement. A textured black powder coat finish ensures their longevity, and they proudly display the Fishbone brand when lit by your tail lights after dark. Keep your Jeep's rear lights looking pristine and your Jeep looking cool with Fishbone Offroad's JL Tail Light Guards – an ideal blend of style and protection.

ORACLE Turn Signal LED Bulbs are Direct OEM Replacement Bulbs that feature a Quick-Fire response, are brighter & smoother than stock halogen bulbs and include a 1 year warranty.

MG1382 MEAN GREEN ALTERNATOR Fitment: 1999 Wrangler TJ 4.0L 1999-2001 Jeep Wrangler TJ 2.5L 1999-2001 Jeep Cherokee LTD 4.0L 1999-2001 Jeep Cherokee Comanche 2.5L The Mean Green High Output Alternator is the answer to all your charging problems. The Mean Green Alternator's tool steel rotor shaft is supported at both ends by heavy duty double sealed bearings. Even the heavy-duty solid copper stator windings are sealed with high temperature insulation. Another is the heat resistant multi-function integrated regulator which continues to operate even at extreme temperatures.

Low profile light mounts do not affect driver’s line of sight • Constructed of 3/16” cold rolled steel • Easy installation with no cutting or drilling • Limited Lifetime warranty on materials and construction • 5 year warranty on the Textured Black Finish • Light mounts only. LED lights not included *Not compatible with Go Rhino XPLOR Sixline LED lights

Low profile light mounts do not affect driver’s line of sight • Constructed of 3/16” cold rolled steel • Limited Lifetime warranty on materials and construction • 5 year warranty on the Textured Black Finish • Easy installation with no cutting or drilling • Light mounts only. LED lights not included

Allows for installation of 3x3 cube lights on Jeep JL/JT's hood • Low profile light mounts do not affect driver’s line of sight • Constructed of 3/16” cold rolled steel • Easy installation with no cutting or drilling • Limited Lifetime warranty on materials and construction • 5 year warranty on the Textured Black Finish • Light mounts only. LED lights not included

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Axle-Back Performance Exhaust System 19385 brings enhanced engine sound and dyno-proven performance to your 2.0L, 3.6L 2018-2024 Jeep Wrangler with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep Wrangler exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep Wrangler's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19385 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Daystars Comfort Ride Suspension systems are truly Driven by Design. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. Comfort Ride Suspension Coil Spring Spacer Kit High Density Progressive Polyurethane Lifts Vehicles Without Sacrificing Ride Quality or Load-Carrying Capacity Easiest Way to Add Larger Off-Road Tires and Wheels Improves Ground Clearance Limited Lifetime Warranty Budget Boost Kit

Synergy Jeep JK Dana 44 Inner Axle Sleeve Kit Designed to increase the strength of the Front D30/44 Axle housing that is prone to bending when larger off road tire are installed and used off road Details: Fits 07-18 Jeep Wrangler JK and Jeep Wrangler Unlimited JK Made from 2.0X.250 1026 DOM Tubing (1.50 inch ID), Machined OD to fit snugly into the stock axle housing Inner Axle Sleeves add a 59 percent increase in strength over stock The stock axle housing must be drilled and plug welding for installation Bare Machined Steel Finish

JcrOffroad's Crusader Front Winch bumper is designed for those looking for improved clearance, but still want some fender protection for the Jeep Wrangler JK, JL and Jeep Gladiator JT. • CNC cut and formed from 3/16" Steel. • Includes (2) 3/4" thick shackle tabs. • Recessed Winch Mount. • Winch ready using the market standard 10" x 4.5" bottom foot mounting profile. • Compatible with the Warn Zeon and Warn Powerplant winches.

Introducing Morimoto's Jeep JL LED Headlight Adapters: Your solution for upgrading the stock lighting on your Jeep Wrangler JL! These adapter brackets are designed to seamlessly fit any 7-inch Round LED headlight onto your JL Wrangler, offering a vast array of headlight options previously available only for the JK model. Notably, they are compatible with Morimoto Sealed7 2.0, Super7, JW Speaker, generics, and more. What sets these adapters apart is their full adjustability, both vertically and horizontally, ensuring optimal illumination and minimal glare for oncoming traffic. Installation is a breeze with JL-specific adapters, allowing a plug-and-play experience for LED headlights with H13 or H4 inputs. Crafted from durable injection-molded ABS housing, these brackets are built to withstand off-road challenges while maintaining excellent quality. Upgrade your Jeep Wrangler JL's lighting with Morimoto's LED Headlight Adapters, offering versatility, adjustability, and durability in one package.

Daystar Body Mounts are precision-engineered to be a direct replacement for factory mounts. They are constructed of a special polyurethane blend that helps insulate the cab while maintaining superior holding power. Our Body Mounts are the perfect upgrade for worn stock mounts and are particularly beneficial in racing applications. Lift 1 Inch Polyurethane Limited Lifetime Warranty Maintains Proper Body and Frame Alignment Increases Performance And Handling Characteristics Vehicle Fluid And Road Grime Resistant Superior to Stock Replacement Rubber Mounts Made In The USA

SeaSucker, the Official Bike Rack Supplier of the UCI World Championships, is proud to introduce the "Rainbow Stripes" Edition of our Mini Bomber Rack for 2 bikes. The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6” SeaSucker vacuum mounts, this rack has plenty of muscle. Fits on virtually any car.

The MagnaFlow 2004-2006 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 17121 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2004-2006 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17121 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17121's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17121 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

Designed to add MOLLE storage and keep pets safely in the cargo area. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish. Cut and formed from .125" steel. Requires two Rear Window MOLLE Panels (not included) to mount. See related products below. Works with or without the XJ Upper Shelf. See related products below. Works with or without the Interior Cargo Basket. See related products below. No drilling required! Proudly designed and made in the USA.

7/8" x 30' — the original strap buster! Use this off-road recovery rope for 4x4 trucks, Jeeps, and SUVs. Made from the highest quality nylon, this powerful rope is the best choice for safe recovery and towing, with a breaking strength of 28,600 pounds. Length is determined before rope is under load.

3/4" x 30' — Meet the new generation of Power Stretch™ offroad recovery rope in a compact size. With 100% more stretching ability and more pulling power than a flat web strap, Renegade is the perfect tool for safely snatching Jeeps and light trucks from mud, sand or snow. We even made it Military Camo green to match the military specs that this rope was derived from. Mesh duffel bag and camo Velcro wrap included. Length is determined before rope is under load.

The MagnaFlow 2007-2011 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 16751 brings out the personality of your 3.8L 2007-2011 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16751 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16751 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

MG3152 MEAN GREEN STARTER Fitment: 1973-1997 Ford F Series 7.5L (460) The Mean Green Gear Reduction Starter is the answer to all of your starter problems. The Mean Green Starter provides 100% more torque than an overweight stock starter. With a 4.4 to 1 gear reduction, roller bearing support, and an integrated solenoid, the Mean Green Starter can crank any engine no matter how high its static compression. Superior design, easy installation, 100% more cranking power. The Mean Green Starter's 3" tool steel driveshaft is supported at both ends by bearings. The stainless steel pinion shaft is externally splined to mate with the larger diameter, internally splined driveshaft. Even the armature in the high-speed motor is supported at each end with bearings. All totaled, there are five bearings in the motor and gear assembly.

Polyurethane Spacer Kit; Front; 3/4 in. Lift; Pair;

The MagnaFlow 2018-2023 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19417 brings out the personality of your 3.6L 2018-2023 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19417 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19417 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The Ultimate LED replacement Halo Headlight for the Jeep Wrangler JK NOW with an Integrated Amber Switchback Turn Signal! Increase night time visibility with high-quality LED illumination focused through advanced precision optics. Each set comes in full color retail-ready packaging and a 2-Year Replacement Warranty. Note* if you want your factory turn signals AND the Halos to work together these adapters will need to be purchased. If you ONLY want the Amber Turn Signal to work, these are not needed. However, the halo will hyper flash (rapid flash or bulb out warning). To prevent this, a Load Equalizer will be needed for each headlight.

With Rough Country’s 1.5” Suspension Lift Kit you can give your 97-06 Jeep Wrangler the aggressive edge your ride deserves. This kit features easy, bolt-on installation and maintains a smooth factory ride quality and increases your ground clearance. Easy bolt-on installation Maintains factory ride quality

Accessory Roller Fairlead for SH1000 Narrow Drum Hoist

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19438 brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19438 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19438 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Give your jeep extra lift with Rough Country’s 1.5” Suspension lift kit. The bolt-on installation process is easy, and these spacers and rear shackles help maintain a factory-like ride quality while giving you that extra clearance you’re looking for. Easy bolt-on installation Increased ground clearance Levels the front with the rear of the vehicle Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.

Mounts with factory hardware Coverts any JP-xxx 4" fog light to a direct bolt-on for Wrangler JL Sport Brackets marked for Left and Right sides, and Top for easier orientation Durable ABS construction Lights sold separately Sold as a pair

No return or warranty on clearance item

Replacement Roller Fairlead for LT2000/3000/4000 Winches

The Yakima RibCage gives your Wrangler's hardtop the support to carry all your gear. Roof top tent - check; platform with all your recovery gear - check. This high-capacity track system, with its internal support structure, allows you to carry with confidence so you can spend the day wheeling and not worrying. After all, it's about getting out, breathing that fresh air and swapping stories with your friends, both new and old.

EVO 07+ JK TransCross-member Exhaust Skid (EVO Long Arm Compatible) Fits all year JKs. The 3/16” Steel Skid Protects Exhaust Crossover, Protects the expensive to replace factory transmission cross-member or can be used with EVO-1144 / EVO-1145 HD Crossmember, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black. Compatible with EVO Long Arm Suspensions.

The new 6.5in X-Series N3 features a transfer case drop kit, adjustable track bar, brake line brackets, sway-bar disconnects and a drop pitman arm, promoting optimum angles for suspension components after lifting. Easy bolt-on installation. Increased ground clearance. Levels the front with the rear of the vehicle. Quick disconnects quickly and easily store out of the way when not in use. Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability. Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use. X-Flex control arm features: Clevite brand OEM style rubber bushings. Flex joints feature a massive 2.5" diameter body and 1.25" thread. Fully greasable. Upper joints pivot up to 20 degrees. Lower joints pivot up to 35 degrees.

EVO MFG 2007-2018 Jeep Wrangler JK / JKU ProTek Rear Shock Skids The lower rear shock and control arm mount on the JK is the lowest and most vulnerable component for impact and damage while on the trail. The EVO MFG ProTek Rear Shock Skid gives the strength and protection needed to help protect your expensive and important suspension components. Fully bolt on with no required cutting or welding, this skid boxes in the rear control arm and shock mount with 3/16” steel and offers ramping flat skids to help you slide off obstacles and not get hang up. Comes with both driver and passenger sides skids, powder coated black for corrosion protection. DOWNLOAD PDF INSTRUCTIONS: EVO-1196B.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Includes Bubba Rope’s Sidewinder 5/8" diameter Power Stretch® Recovery Rope and matching NexGen Gator-Jaw® synthetic soft shackles. The Power Stretch Rope with vinyl armor Gator-ized coatings comes in a 20' length. The set also includes a heavy-duty mesh duffle gear bag for easy carrying and storing. With multiple color options this is the gear set that started it all, setting the bar for dynamic off-road recovery gear. Copied but never duplicated, Bubba’s Off-Road Recovery Gear is 100% made in the USA with unmatched hand-made quality. With a certified breaking strength of 14,000 lbs., the gear set is ideal for vehicles weighing 1,000 – 3,000 lbs. Everything you need for a faster, smarter, safer way to get your UTV unstuck.

EVO MFG 07+ JK Transmission Skid (Manual) BLK 3/16” Steel skid 100% Bolt-on with supplied hardware Powder coated black Notes: Manual Transmission only Requires EVO-1101B (2007-2011 JK/JKUs) or EVO-1091B (2012+ JK/JKUs) to mount INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

The MagnaFlow 2007-2011 Jeep Wrangler Competition Series Cat-Back Performance Exhaust System 16391 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 3.8L 2007-2011 Jeep Wrangler with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.5in. Satin Welded-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 16391 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16391's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Classic Jeeps just get better with age, become more desirable and even turn into a collector's dream. That's why we make...

The Rock Krawler Suspension JL Wrangler 2.5 inch 392 Adventure - X "No-Limits" Mid-Arm System is specifically designed for the WRANGLER 392 owners who want a complete system, bolt-in installation, and the best articulation of any MID-ARM kit on the market. Our system proves its durability and off-road performance every time you hits the streets or trail! The Term, "No-Limits" comes from the inclusion of our front sway bar links specifically designed for use with the factory electronic sway bar disconnect feature found standard in your Rubicon Wrangler! The sway bar links themselves come with factory sized hardware, a CNC machined billet aluminum center section, and Made in USA heim joints from FK bearing, once installed, just press the button and hit the rocks! The Term, Adventure - X comes from the inclusion of 8 adjustable control arms with our 100% Service Free Adventure Series joints installed. Our industry leading, Adventure - X mid-Arms feature adjustable upper and lower control arms and offer a total of 70 degrees of misalignment when paired with our Adventure series Joints at the frame connection and at the axle. The inherent bind in a factory JL control arm is greatly reduced. With so much adjustability, it allows you to precision tune the JL's caster and pinion angle front and rear. Driving you home with the most comfortable ride possible in a Wrangler, are our TRIPLE RATE coils. All 4 coils work together to achieve excellent on-road comfort that we feel is better than the OEM linear rate springs. The coil itself is built with the proper "Free-length" for off-road articulation and stays firmly seated in the coil bucket (as long as a proper length shock is installed), and overall a very controlled reaction to bumps, rocks, sand, mud and whatever else you can manage to throw at them! All Rock Krawler JL systems include correction pads that reduce the spring bow inherent in the factory set up. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on road handling.

The must-have addition for Jeep Wrangler JK owners - is the Stinger HEIGH10 10" Radio Plug-n-Play bundle with AHD/CVBS Dual Blind Spot Cameras. This kit is designed for off-road enthusiasts prioritizing advanced features and top-notch quality. Bluetooth connectivity allows wireless phone pairing for streaming music and hands-free calls. Apple CarPlay and Android Auto (wired connection) enable easy access to music, directions, and calls via voice commands. The SiriusXM ready feature lets you enjoy a wide range of satellite radio channels for a premium driving experience. The durable AHD/CVBS Dual Blind Spot Cameras are built to withstand rugged off-road conditions and offer flexible installation options. Elevate your Jeep experience with this ultimate package that surpasses expectations.

Shown on CJ8, application discontinuedClassic Jeeps just get better with age, become more desirable and even turn into a...

Maintains Proper Body and Frame Alignment Increases Performance And Handling Characteristics Vehicle Fluid And Road Grime Resistant Superior to Stock Replacement Rubber Mounts Maintains Proper Body and Frame Alignment Increases Performance And Handling Characteristics Vehicle Fluid And Road Grime Resistant Superior to Stock Replacement Rubber Mounts

A must have safety factor whenever operating any winch or mechanical object. Saves skin and fingers from abrasion, rope burns and burrs, and increases dexterity and grip in harsh weather elements. XL winch glove with Superwinch logo Long lasting protection which adds safety and control to winch operator during line retrieval and setup. 1 Year Limited Warranty

Give your jeep extra lift with Rough Country’s 1.5” Suspension lift kit. The bolt-on installation process is easy, and these spacers and rear shackles help maintain a factory-like ride quality while giving you that extra clearance you’re looking for. Easy bolt-on installation Increased ground clearance Levels the front with the rear of the vehicle Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.

The MagnaFlow Jeep Wrangler JK Overland Series Axle-Back Performance Exhaust System #19668 is engineered for off-road function and built to explore further. This Jeep Wrangler exhaust system is designed for the 2007-2018 Jeep Wrangler equipped with the V6 3.6L or 3.8L engine option. The high clearance exhaust design of this kit is designed to keep clear of any challenging terrain or obstacles you may come across. #19668 2.5” diameter mandrel bent main piping passes through an 18” straight-through oval muffler and No Drone Technology (NDT) tuned chamber before exiting in a high-clearance tucked tailpipe to the rear of the passenger side. MagnaFlow NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. The entire Jeep exhaust kit can be tailored to your preferred exhaust tone by changing out which module is attached to the integrated muffler’s accessory port. The included pipe cap, J-pipe and NDT modules can be combined in various ways to mitigate a wide range of droning frequencies, so which exhaust sound profile you choose to go with is up to your driving style. Looking to minimize overall drone? Simply connect the NDT module. Prefer a more traditional rendition of that famous MagnaFlow exhaust tone? All you need to do is cover the accessory port with the included pipe cap. Exhaust kit #19668 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from near the rear axle on back. This Jeep Wrangler JK axle-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

7/8" x 10' — Meet the new generation of kinetic energy recovery rope in a compact size. With 100% more stretching ability and more pulling power than a flat web strap. We even made it Military Camo green to match the military specs that this rope was derived from. Mesh duffel bag and Velcro wrap included. Length is determined before rope is under load.

The MagnaFlow 2018-2023 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 19431 brings additional off-roading prowess and our deep signature exhaust note to your 3.6L 2018-2023 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 19431 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19431's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 19431 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

A Must" for going off-road with confidence. Contains all the rigging and recovery tools needed for most any situation. Includes (2)-3/4" D-Rings, (1)-2"x 8' Tree Trunk Protector rated up to 20,000 pounds, (1)- 3"x 30' Recovery strap rated @ 26,000 pounds, and (1)-pair winching gloves and (1) Recovery Gear tote bag. Includes: (2) 3/4 in Bow Shackles rated at 10,000 lbs, (1) 2 in x 8 ft Tree Trunk Protector rated at 20,000 lbs, (1) 3 in x 30 ft Recovery Strap rated at 26,000 lbs, (1) Winching Gloves, Denier Gear Bag Emergency preparation, and peace of mind for off highway travel. This "getaway kit" contains all the rigging and recovery tools needed for most any situation. Easy storage tote bag contains variety of recovery tools. 1 Year Limited Warranty Specifications

The Rock Krawler Suspension JLU Wrangler 2.5 inch Ultimate Adventure 4XE Mid-Arm System is specifically designed for Wrangler owners who want a complete system, bolt-in installation, and some of the best articulation of any MID-ARM kit on the market. Our system proves its durability and off-road performance every time you hits the streets or trail! The Term, "Ultimate Adventure System" comes from the inclusion of 4 non-adjustable Lower control and 4 fully adjustable upper arms with our 100% Service Free Adventure Series joints installed. Our industry leading, Adventure series mid-Arms offer a total of 70 degrees of misalignment when paired with our Adventure series Joints at the frame connection and at the axle. The inherent bind in a factory JL/JT control arm is greatly reduced. Driving you home with the most comfortable ride possible in a Wrangler, are our TRIPLE RATE front and rear coils. All 4 coils work together to achieve excellent on-road comfort that we feel is better than the OEM springs. The coil itself is built with the proper "Free-length" for off-road articulation and stays firmly seated in the coil bucket (as long as a proper length shock is installed), and overall, a very controlled reaction to bumps, rocks, sand, mud and whatever else you can manage to throw at them! All Rock Krawler JL systems include correction pads that reduce the spring bow inherent in the factory set up. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on road handling.

No return or warranty on clearance item

Fits 2018 - Current Jeep Wrangler Unlimited JLU Fits 4-Door Models Only 2 Stage black textured powder coat Made from steel Includes all mounting hardware Sold as a pair If your Jeep Wrangler JL is equipped with the Factory Subwoofer, only 1 Bin can be utilized. (Order FB25215 if only a Single is needed) Will not work on Models with Sky One-Touch Power Top For 2018-Up Jeep Wrangler JL 4-Door owners, Fishbone Offroad introduces a game-changing solution. Unlock a world of storage with our Wheel Well Storage Bins. Crafted from robust steel and finished in a sleek two-stage black textured powder coat, these bins optimize the unused spaces within your Jeep. Perfect for keeping those smaller items secure and organized, they come as a pair with all the mounting gear you need. However, for those rocking the Factory Subwoofer, you can only utilize one bin. But don't sweat it, we've got a singular option for you, FB25215. Note: these bins aren't compatible with the Jeep Sky One-Touch Power Top. Whether you've got a hardtop or a soft top, installation's a breeze. Dive into an organized ride, backed by a decade of Fishbone's engineering finesse and top-tier design precision. After all, it's not just about the journey, but also how comfortably and efficiently you get there. Installation Instructions

The MagnaFlow Jeep Loop Delete 19432 is a 2in. diameter mandrel bent stainless steel pipe that i's weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

The Rock Krawler Suspension JL Wrangler 2.5 inch Adventure - X "No-Limits" Mid-Arm System is specifically designed for RUBICON owners who want a complete system, bolt-in installation, and the best articulation of any MID-ARM kit on the market. Our system proves its durability and off-road performance every time you hits the streets or trail! The Term, "No-Limits" comes from the inclusion of our front sway bar links specifically designed for use with the factory electronic sway bar disconnect feature found standard in your Rubicon Wrangler! The sway bar links themselves come with factory sized hardware, a CNC machined billet aluminum center section, and Made in USA heim joints from FK bearing, once installed, just press the button and hit the rocks! The Term, Adventure - X comes from the inclusion of 8 adjustable control arms with our 100% Service Free Adventure Series joints installed. Our industry leading, Adventure - X mid-Arms feature adjustable upper and lower control arms and offer a total of 70 degrees of misalignment when paired with our Adventure series Joints at the frame connection and at the axle. The inherent bind in a factory JL control arm is greatly reduced. With so much adjustability, it allows you to precision tune the JL's caster and pinion angle front and rear. Driving you home with the most comfortable ride possible in a Wrangler, are our TRIPLE RATE coils. All 4 coils work together to achieve excellent on-road comfort that we feel is better than the OEM linear rate springs. The coil itself is built with the proper "Free-length" for off-road articulation and stays firmly seated in the coil bucket (as long as a proper length shock is installed), and overall a very controlled reaction to bumps, rocks, sand, mud and whatever else you can manage to throw at them! All Rock Krawler JL systems include correction pads that reduce the spring bow inherent in the factory set up. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in on road handling.

JcrOffroad's Crusader Rock Sliders are designed to be used as a slider and step, with built-in rock lights! • CNC cut and formed from .125" steel. • Built-in LED Rock Lights (lights included). • Unibody frame and pinch seam mounted. • Bolt-on insallation! • Comes powder coated Satin Black tex with Silver tex tread plates and bottom skid. • Includes mounting hardware. • Includes JcrOffroad Sticker. • Sold in Pairs.

Dynatrac's 4.5" Jeep JK Suspension Lift Systems aims to strike a perfect balance between wheel travel, articulation, ground clearance, and precise on and off-road handling characteristics. With these goals met, Dynatrac-equipped JK's can take on rolling desert whoops, crawl over obstacle-riddled trails, and drive back home in comfort all in the same day. The Dynatrac Jeep JK 4.5" Suspension Lift System 3 includes dual-rate coil springs, track bar drop brackets, high-steering components, bumps top spacers, rear brake lines, rear sway bar links, adjustable front upper and rear lower links, and Dynatrac 2.5 EnduroSport shocks. Tested and tuned, the Dynatrac Jeep JK 4.5" Suspension Lift System 3 offers stability and drivability over a wide range of off-road terrains while keeping a smooth on-road feel for everyday driving. Installing this kit allows proper clearance for 35" tall tires with no modifications and 37" tires with aftermarket high clearance fenders.

The aFe POWER Twisted Steel Y-pipe is designed to connect the OE exhaust or to aFe POWER's MACH Force-Xp exhaust system. Designed also to accommodate aftermarket lift kits, this y-pipe features 2 x 2" into 1 x 2 1/2" stainless steel mandrel-bent tubing with OE flanges and 100% hand-MIG welded construction that resists corrosion. A true merged collector is used to eliminate dead space that can cause turbulence and hinder flow that is prevalent with formed collectors. The smooth curves and increased diameter helps remove restriction and keeps exhaust gas flowing smoothly for improved performance and durability on and off the trails. Leak-Free Seal: High quality OE style flanges and band clamps are used for a complete 360 degree sealing surface. True Merge Collector: Eliminates dead space that can cause turbulence and hinder flow that formed collectors are prone to produce. Hassle-Free Installation: All components are supplied for a hassle-free installation with no modifications necessary. Fitment Note: This item will only fit 4-Door models. Emissions Disclaimer: This product does not require a CARB EO#. aFe POWER y-pipes are engineered and manufactured in our Corona, California manufacturing facility.

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19437 brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19437 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19437 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.