List of Racks & Accessories Jeep Parts

Jeep Gladiator JT Rock Skins Set - ADHESIVE / BOLT ON -

EVO Jeep Gladiator Rock Skins compliment our Rock Sliders adding more protection to the bottom rocker panel of your JLU. OPTIONS: ADHESIVE- 3M adhesive to bond Rock Skins to your Jeep. Installer applied. BOLT ON- Traditional Bolt on Style Rock Skins. Requires drilling into vehicle body. Light Weight and Corrosion Resistant Aluminum

GATE PLATE (BLACK) JK/JKU

EVO MFG Jeep JK Gate Plate 2 piece system Pre-Drilled license plate mounting points Fits 2007 to current Jeep JK (Fits both wide and tall tailgate vents without removal) Powder coated for clean finish and corrosion protection Easy install using factory hardware

2007-2011 Jeep Wrangler PROTEK SKID SYSTEM (AUTO TRANSMISSION) JK/JKU

EVO Protek Skid System Complete Kit, 07-11 Auto Kit includes: EVO-1101B EVO MFG 2007-2011 JK ProTek Oil Pan Skid ¼” Steel skid fully boxed for protection on all sides, 100% Bolt on with Factory Hardware, Accessible oil drain without removing skid. EVO-1102B EVO MFG 2007-2011 JK 3.8L Transmission Skid (Auto) BLK 100% Bolt on with factory hardware. Powder coated black. EVO-1103B EVO MFG 2007-2011 JK 3.8L Skid Connection BLK Requires Oil and Transmission skid to mount 3/16” Steel Skid 100% Bolt-on with supplied hardware Bridges gap between Oil Pan Skid and Auto Transmission Skid Powder coated black EVO- 1093B EVO MFG TransCross-member Exhaust Skid 2007-2015, BLK Fits all year JKs (2012 included) 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012 JKs, Protects the expensive to replace factory transmission cross-member, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black Notes: EVO-1093B not compatible with Long Arm Kits. INSTALLATION TIME 3.5-7 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

2018-2024 JEEP WRANGLER HEAVY DUTY HINGED SPARE TIRE CARRIER FOR JL/JLU

EVO MFG JEEP Wrangler JL/JLU Heavy Duty Hinged Spare Tire Carrier The JL factory tire carrier and tailgate was never intended to handle the loads associated with larger, heavier wheel and tire combinations. Many aftermarket tire carriers address this issue, but are complicated to install, require an aftermarket bumper, and add multiple processes to open your tailgate. The EVO MFG JL HD Hinged Tire Carrier is a body mounted tire carrier designed to allow you to carry up to a 40” tire while retaining your vehicle’s one handed easy access to the rear cargo area. Its design is tough enough to handle the stresses associated with larger tires and simple enough to keep all the functionality your factory tailgate already has in a simple easy to install and operate package. The EVO MFG JL HD Hinged Tire Carrier is engineered for strength and durability. It’s made from 3/16” and 3/8" steel that’s been laser cut, CNC press brake formed, and fully fixture welded. In the factory configuration, the wheel and tire load is transferred through the tailgate to the door hinges. Knowing that this is the weak link, the Tire Carrier is designed to bypass the tailgate and transfer the heavier wheel and tire load directly to the hinges. The hinge brackets are made from the same 3/16 and 3/8" steel and are gusseted for strength with integrated bump stops that stop the weight of tailgate and tire when it’s fully opened. Jeep Wrangler JL Tire Carrier for 35 inch tire The EVO MFG JL HD Hinged Tire Carrier’s mounting points are designed to work with your JL by transferring loads to the JL’s body in a location that is reinforced from the factory with multiple layers of strong, stamped, internal, steel gussets. The simple design keeps a low profile that fits the contours of the vehicle and carries the tire close to the body. Once installed, the tailgate will operate as before, maintaining the factory catch and the easy one handed opening, while the beefy hinge hardware swings smoothly with the added weight of a larger tire. Jeep Wrangler Tire Carrier for 37 inch tire The tire mounting position is engineered to be adjustable in movement up and down as well as in and out. This ensures your tire will fit properly, won’t rattle, and gives you departure angle and rear window visibility options. The EVO MFG JL HD Hinged Tire Carrier includes an integrated antenna mount. Install is simple and can be done with a basic tool set by any installer. It’s all bolt-on with no drilling or cutting needed. Wheel mount on tire carrier comes in stock 5on5 pattern with studs. Wheel mounts is pre drilled to covert by installer to 8on6.5 for aftermarket (Dana 60/70/80) axle wheel patterns Compatible with Factory Rear Reverse Camera and 3rd brakelight INSTALLATION TIME 2-3 HOURS All Jeep Wrangler 2018+ Compatible Image may differ from actual product Factory 3rd Brakelight is retained with this tire carrier

Jeep Wrangler HD PROTEK TRANSMISSION CROSSMEMBER JK (RAW) 2007 2008 2009 2010 2011

EVO MFG 2007-11 HD ProTek Transmission Crossmember JK (RAW) The factory JK Transmission crossmember is weak and volernable to damage being that it is mostly unprotected and the lowest part of the chassis. It is also expensive to replace with factory components. The EVO MFG HD Crossmember addresses this with a 3/16” plate steel construction, laser cut and CNC formed alternative the is significantly stronger and much more cost effective than a factory replacement. Best of both worlds, Cheaper and stronger. Its shape is the same as factory and includes all threaded inserts for retention off all factory and aftermarket skid plates. Fully boxed constuction for 2007-11 model year Jeep Wrangler JK/JKU Section welded to keep a truer part, minimizing heat warp Easy install, No cutting or drilling required Raw finish INSTALLATION TIME 1-2 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-1144.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler JL JLU and Jeep Gladiator Front Alumilite Bumper With Factory Fog Lights

Jeep Wrangler JL/Gladiator Front Alumilite Bumper With Fog Lights 2018 2019 2020 2021 2022 Jeep Wrangler JL/Gladiator Front Alumilite Bumper With Fog Lights ONLY 36 LBS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

QUARTER POUNDER FRONT WINCH BUMPER FOR JEEP WRANGLER & GLADIATOR JK/JL/JT

JEEP WRANGLER JL, JLU, JK, JKU & JT GLADIATOR FRONT WINCH BUMPER Jeep Wrangler Gladiator Front High Clearance Winch Bumper High Clearance, Military Inspired, Ultra High Strength Front Bumper for the Wrangler JK/JKU, JL/JLU and Gladiator JT. Features: ¼” Steel Construction. Precision Laser Cut and CNC Bent. Deeply Recessed Winch Mounting Location for efficient vehicle cooling. Two Front Hi-Lift Jack Points Integrated In. 2” of gained front ground clearance for increased approach angle. Narrow width to effectively clear large tires at full turn and articulation. Proudly Made in the USA EVO Military Style Front Winch Bumper If installing bumper without D Ring Shackle mounts, or Stinger, mounting hardware will be needed: EVO-770015 (sold separately). If installing with D Ring Shackle Mounts or Stinger, Hardware is included to mount both bumper and accessory item to your vehicle in the accessory item. When optioned with Dring or Stinger. This bumper combo is often used for flat tow/ tow bar. Consult your tow bar manufacturer for applications/ratings. 3/4” tabs with 1” pin/hole Jeep Gladiator Lifted in Oregon Forest Jeep Mojave vehicle will require installer to relocate Shock reservoirs no provisions are provided to achieve this Steel 1/4 Pounder weight is approximately 70 lbs Aluminum 1/4 Pounder Weight is approximately 40 lbs Powdercoated bumpers are offered as a convenience. We do not cover finish/powdercoating under warranty. All our bumper/tire Carrier products are also available in raw metal for local treatment specific to your area needs.

2007-2018 JKeep Wrangler K EVO LONG ARM COMPATIBLE TRANSCROSSMEMBER EXHAUST SKID, BLK FOR JK/JKU

EVO 07+ JK TransCross-member Exhaust Skid (EVO Long Arm Compatible) Fits all year JKs. The 3/16” Steel Skid Protects Exhaust Crossover, Protects the expensive to replace factory transmission cross-member or can be used with EVO-1144 / EVO-1145 HD Crossmember, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black. Compatible with EVO Long Arm Suspensions.

2 DOOR ROCK SLIDERS (RAW) FOR JK Wrangler

The EVO MFG Rock Skins are side armor plates are laser cut from 3/16 steel and CNC bent. They are a bolt on installation with stainless steel hardware. These can be used with all factory Jeep sliders and steps as well as all aftermarket frame mounted rock sliders. The Rock Skins protection contours around stock and aftermarket fenders (factory mounting location). This will give the side of your Jeep secondary protection against damage of rocks and sliders pushing into the body. They are available for 2 Door and 4 Door Model JK’s. Each kit, 2 Door or 4 Door comes with both driver side and passenger side rock skin and all mounting hardware. All EVO MFG products are proudly Made in the U.S.A. *Drilling into body required INSTALLATION TIME 2-4 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-1048-2D.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

JEEP WRANGLER JL/JLU FASCIA WITH D RING SHACKLE REAR BUMPER DELETE, ALUMINUM

JEEP WRANGLER JL, JLU ALUMINUM REAR BUMPER Jeep Wrangler JL/JLU Fascia with D Ring Shackle Rear Bumper Delete, Aluminum EVO MFG Rear Bumper Delete Fascia offers a clean high clearance update to the rear of your JL or JL Unlimited. When you are looking to avoid a heavy and clunky rear bumper, this Fascia is an excellent alternative to give your JL/JLU a finished look. Fascia is made out of 3/16" TIG welded Aluminum for durability and light weight. Strong ¾” thick steel D ring shackle tabs mounted directly to the frame. Shackle tabs drilled for 7/8” and smaller shackles. Factory rear trailer hitch receiver compatible keeping factory towing potential. Extremely light 15 lb assembled weight. Simple installation with standard tools by novice mechanics. Fits 2018+ Jeep Wrangler JL and JL Unlimited 2019 2020 2021 2022 2023 2024 INSTALLATION TIME 1-2 HOURS *Bumpers ship bare aluminum fascia with black powdercoated steel shackle tabs for a ready to install aluminum bumper or ready to paint/powdercoat to you specific color. *Not compatible with Jeep Park Assist Back Up Sensors. (Will work on park assist equipped vehicles, but park assist will be disabled). DOWNLOAD PDF INSTRUCTIONS: EVO-3116AL.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

GATE PLATE VENT DELETE (ALUMINUM) JK/JKU

EVO MFG Jeep JK Gate Plate Vent Delete (Aluminum) Pre-Drilled license plate mounting points Fits 2007 to current Jeep JK/JKU Aluminum construction and easy install using factory hardware Factory Vent baffle removal required. Cabin will still vent Works with both wide and tall tailgate vents

2007-2011 Jeep Wrangler JK EVO LONG ARM COMPATIBLE PROTEK SKID SYSTEM (MANUAL TRANS)

EVO 07-11 JK EVO Long Arm Compatible Protek Skid System Complete Kit (Manual Trans) Kit includes: EVO-1101B EVO MFG 2007-2011 JK ProTek Oil Pan Skid ¼” Steel skid fully boxed for protection on all sides, 100% Bolt on with Factory Hardware, Accessible oil drain without removing skid. EVO-1104B EVO MFG 2007-2012 Transmission Skid (Manual) BLK 3/16” Steel skid 100% Bolt-on with supplied hardware Powder coated black EVO- 1093LAB EVO MFG 07+ TransCross-member Exhaust Skid, (EVO Long Arm Compatible) Fits all year JKs. The 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012+ JKs, Protects the expensive to replace factory transmission cross-member or can be used with EVO-1144 / EVO-1145 HD Crossmember, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black. Compatible with EVO Long Arm Suspensions.

Jeep Wrangler Unlimited JLU Rock Skins Aluminum -ADHESIVE / BOLT ON -

EVO Jeep Wrangler 4 Door Rock Slider Skins compliment our Rock Sliders adding more protection to the bottom rocker panel of your JLU. OPTIONS: ADHESIVE- 3M adhesive to bond Rock Skins to your Jeep. Installer applied. BOLT ON- Traditional Bolt on Style Rock Skins. Requires drilling into vehicle body. Light Weight and Corrosion Resistant Aluminum

Jeep Wrangler HD PROTEK TRANSMISSION CROSSMEMBER JK (BLACK), 2007 2008 2009 2010 2011

EVO MFG 2007-11 HD ProTek Transmission Crossmember JK (BLACK) The factory JK Transmission crossmember is weak and volernable to damage being that it is mostly unprotected and the lowest part of the chassis. It is also expensive to replace with factory components. The EVO MFG HD Crossmember addresses this with a 3/16” plate steel construction, laser cut and CNC formed alternative the is significantly stronger and much more cost effective than a factory replacement. Best of both worlds, Cheaper and stronger. Its shape is the same as factory and includes all threaded inserts for retention off all factory and aftermarket skid plates. Fully boxed constuction for 2007-11 model year Jeep Wrangler JK/JKU Section welded to keep a truer part, minimizing heat warp Easy install, No cutting or drilling required Powder coated Black finish INSTALLATION TIME 1-2 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-1144B.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Gladiator JT Rock Sliders

As the confidence grows, the trails get harder and the need to protect the most vulnerable area of your Jeep Gladiator body becomes greater. The rocker panel and door area can take a beating if not properly guarded especially on the longer wheelbase Gladiator JT. The EVO MFG Gladiator JT Rock Slider Steps are built for the ultimate in rocker and door protection. Utilizing large surface contact mounting plates on the frame, 4 extremely strong frame mounting legs and huge 2" DOM tubing to round out the most premier frame mounted rock slider available. Located with existing factory bolt locations these sliders can be easily installed to your Jeeps frame with standard tools and the optional bolt on hardware kit (EVO-811) with ease at home or welded on as they come with no need for additional parts for that next level hardcore off roading. JT Gladiator Rock Sliders Positioned to be used as a secure footstep to ease entry and exit from the vehicle, the optional (EVO-810) Gladiator JT Rock Slider Step Plates further increase foot grip surface. Additionally, the Rock Slider Step Plates gives the option of a 2-tone color for that personal vehicle touch. Gladiator Hardcore Rock Sliders on the rocks in moab Built in and optional (EVO-813W 2 lights per kit) integrated rock lights, 1 at each end of each slider are available to effectively angle light towards your Gladiators vulnerable area at night giving you the protection you need and the view to get through the toughest trails illuminated and protected. (Light kit is lights only, wire yourself. No supplies for completing wiring to vehicle are supplied) JT Gladiator Rock Slider going up water fall *Choice of Bolt on or weld on installation *Optional Integrated Rock Lights *Integrated Step for ease of entry and exit *Factory bolt alignment for simple and accurate positioning. *4 Extremely strong frame mounting points Images may differ from actual product Rocksliders ship raw steel ready for painting or powdercoating. EVO-3147: Shown with Option JT Body Rock Skins. Sold Separately.

Jeep Wrangler JL/Gladiator Front Alumilite Bumper. With Factory Fog Light Provisions, Hoop and Skid Combo

Jeep Wrangler JL/Gladiator Front Alumilite Bumper. With Fog Lights Provisions, Hoop and Skid Combo Jeep Wrangler JL/Gladiator Front Alumilite Bumper. With Fog Lights Provisions, Hoop and Skid Combo Bumper with winch plate and fog light provisions weighs just 35lbs WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler HD PROTEK TRANSMISSION CROSSMEMBER JK (BLACK) 2012 2013 2014 2015 2016 2017 2018

EVO MFG 2012-2018 Jeep Wrangler HD ProTek Transmission Crossmember JK (BLACK) The factory JK Transmission crossmember is weak and volernable to damage being that it is mostly unprotected and the lowest part of the chassis. It is also expensive to replace with factory components. The EVO MFG HD Crossmember addresses this with a 3/16” plate steel construction, laser cut and CNC formed alternative the is significantly stronger and much more cost effective than a factory replacement. Best of both worlds, Cheaper and stronger. Its shape is the same as factory and includes all threaded inserts for retention off all factory and aftermarket skid plates. Fully boxed constuction for 2012+ model year Jeep Wrangler JK/JKU Section welded to keep a truer part, minimizing heat warp Easy install, No cutting or drilling required Powdercoated Black finish INSTALLATION TIME 1-2 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-1145B.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Gladiator Alumilite Rear Bumper

JEEP GLADIATOR ALUMINUM REAR BUMPER Our JT Gladiator rear bumper is light weight, integrates the stock back up sensors and tow hooks. It also works with the stock tow package and trailer plug. DOWNLOAD PDF INSTRUCTIONS: EVO-3115AL.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

2007-2011 Jeep Wrangler PROTEK OIL PAN SKID 3.8L JK/JKU

2007-2011 JK ProTek Oil Pan Skid ¼” Steel Skid Fully boxed for protection on all sides 100% Bolt on with Factory Hardware Accessible oil drain without removing skid Fits both manual and automatic transmission Powdercoated black INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

2007-2011 Jeep Wrangler JK PROTEK SKID SYSTEM (MANUAL TRANSMISSION) JK/JKU 2007 2008 2009 2010 2011

EVO Protek Skid System Complete Kit, 2007-11 Manual Kit includes: EVO-1101B EVO MFG 2007-2011 JK ProTek Oil Pan Skid ¼” Steel skid fully boxed for protection on all sides, 100% Bolt on with Factory Hardware, Accessible oil drain without removing skid. EVO-1104B EVO MFG 2007-2012 Transmission Skid (Manual) BLK 3/16” Steel skid 100% Bolt-on with supplied hardware Powder coated black EVO- 1093B EVO MFG TransCross-member Exhaust Skid 2007-2015, BLK Fits all year JKs (2012 included) 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012 JKs, Protects the expensive to replace factory transmission cross-member, 100% Bolt On with factory and supplied hardware. Works on both Manual and Automatic JKs Powder coated Black Notes: EVO-1093B not compatible with Long Arm Kits. INSTALLATION TIME 3-6 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-210.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

2007-2018 Jeep Wrangler PROTEK EVAP SKID FOR JK/JKU

VO MFG 2007- Current JK ProTek Evap Skid The Jeep JK and JKU’s Evap Canister is venerable to potential damage while on the trail. EVO MFG’s ProTek Evap Skid protects the evap canister from trail damage. The EVO evap skid is boxed in on all four sides for the ultimate protection. The install process is easy and there is no need to remove factory brackets, hoses, clips, or skids. All are retained for the simplest fool proof install, strongest, fully protected evap skid available. Fits all year and model Jeep Wrangler JK and JKU 3/16” four sided box welded steel construction Retains all OE mounting brackets and skids for ease of install and added security No need to remove factory clips or hoses, all lines stay connected during the install process Powdercoated for clean finish and corrosion prevention Easy Install INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler Rear Alumilite Bumper

Jeep Wrangler Rear Alumilite Bumper Jeep Wrangler JL/JLU Alumilite Rear Bumper, Aluminum with D Ring Shackles CNC laser cut and formed with precision CNC press brake TIG Welded 3/16” Aluminum plate shell Strong ¾” thick steel D ring shackle tabs mounted directly to the frame. Shackle tabs drilled for 7/8” and smaller shackles. Factory rear trailer hitch receiver compatible keeping factory towing potential. Body width with narrow corner wrap for ultimate in protection and corner avoidance. High clearance design keeps departure angle at a maximum. Compatible with and without Jeep Park Assist Back Up Sensors. Simple installation with standard tools by novice mechanics. Fits 2018-2021 Jeep Wrangler JL and JL Unlimited Assembled weight of EVO Alumilite Rear Bumper is only 28 lbs. Less than half the weight of the Factory Steel Bumper (59.4 lbs) INSTALLATION TIME 2-3 HOURS Bumpers ship bare aluminum bumper shell with black powdercoated steel shackle tabs and mounting plates for a ready to install aluminum bumper or ready to paint/powdercoat to you specific color. WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Gladiator Rear Swaybar Frame Tab Stiffener Gusset PAIR BLACK

Reinforce and/or fix a commonly damaged rear frame sway bar tab on the Jeep Gladiator.  Simple bolt on install with standard tools.  No drilling,...

Jeep Wrangler Unlimited JLU Rock Sliders

Choice of Bolt on or weld on installation *Optional Integrated Rock Lights *Integrated Step for ease of entry and exit *Factory bolt alignment for simple and accurate positioning *3 Extremely strong frame mounting points *Compatible with EVO MFG High Clearance Long Arm Suspension As the confidence grows, the trails get harder and the need to protect the most vulnerable area of your Jeep Wrangler JL Unlimited body becomes greater. The rocker panel and door area can take a beating if not properly guarded. The EVO MFG JLU Rock Slider Steps are built for the ultimate in rocker and door protection. Utilizing large surface contact mounting plates on the frame, 3 extremely strong frame mounting legs and huge 2" DOM tubing to round out the most premier frame mounted rock slider available. Located with existing factory bolt locations these sliders can be easy installed to your Jeeps frame with standard tools/drill and the optional bolt on hardware kit (EVO-808) with ease at home or welded on as they come with no need for additional parts for hardcore off roading. They are EVO MFG JLU High Clearance Long Arm Compatible. Jeep Wrangler Rock Sliders Positioned to be used as a secure footstep to ease entry and exit from the vehicle, the optional (EVO-807) JLU Rock Slider Step Plates further increase foot grip surface. Additionally, the Rock Slider Step Plates gives the option of a 2-tone color for that personal vehicle touch. JL Wrangler Rock Sliders Built in and optional (EVO-813W 2 lights per kit) integrated rock lights, 1 at each end of each slider are available to effectively angle light towards your JLU's vulnerable area at night giving you the protection you need and the view to get through the toughest trails illuminated and protected. (Light kit is lights only, wire yourself. No supplies for completing wiring to vehicle are supplied) Images may differ from actual product

Jeep JL & JT Gladiator A Pillar Cowl Ditch Light Mounts, Pair Black

EVO-3109B Jeep JL & Gladiator A Pillar Cowl Ditch Light Mounts, Pair Black Simple bolt on install to 2018-2021 Jeep Wrangler JL & JLU and...

HI-LIFT JACK TAILGATE MOUNT FOR JK/JL

2007+ Jeep Wrangler JK/JKU and 2018+ JL/JLU. 1/8” Boxed Welded Steel Construction. Powdercoated black for Clean Finish and Corrosion Prevention. Integrated CB Antenna/ Trail Flag Mount. Secure Hand Screw for Easy Install and Removal of Hi-Lift Jack. Easy Install. The EVO MFG Jeep JK Hi-Lift Jack Tailgate Mount has a conveniently integrated antenna/ trail flag mount. Works with the OE tire carrier, EVO MFG Tire Carrier, and most aftermarket bumpers. Highlift Jack Not Included Notes: Only stow Jack to EVO Mount in FULLY DOWN position Jack base/foot may require a ¼” drill be made in the jack foot to fully secure Handle keepers on jack/handle are recommended Recommended for 48” or smaller jacks. 48” Jack will protrude above your JKs roofline a few inches when mounted

PROTEK ENGINE, TRANS SKID, BLACK FOR JLU 3.6L 2018 -2020

From the factory the Jeep Wrangler JLU comes with decent skid plates for most of the undercarriage components but the most important and expensive components, engine and transmission, are left completely unprotected and therefore vulnerable to trail damage. The EVO MFG JLU 3.6L Protek Engine/Trans Skid Plate system protects these vital components with a 3/16" Steel Skid, Laser cut and CNC Formed to give ideal clearance and strength. Protecting the unprotected. EVO-3039B is compatible with all EVO MFG JLU Suspension Systems. Easy to install with normal hand tools. No drilling, cutting or welding required. All required installation hardware included.

2007-2018 Jeep Wrangler PROTEK MANUAL TRANSMISSION SKID FOR JK/JKU

EVO MFG 07+ JK Transmission Skid (Manual) BLK 3/16” Steel skid 100% Bolt-on with supplied hardware Powder coated black Notes: Manual Transmission only Requires EVO-1101B (2007-2011 JK/JKUs) or EVO-1091B (2012+ JK/JKUs) to mount INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

PROTEK FRONT AXLE DISCONNECT SKID PLATE, BLACK FAD CAD FOR JL/JT

Jeep JL/ JT Protek Front Axle Disconnect Skid Plate, Black FAD CAD The Jeep Wrangler JL/JLU/JT front axle is manufactured with a CAD Center Axle Disconnect (also called FAD). This feature is designed to improve fuel economy but does add a vulnerable load bearing casting to long side of the JL/JLU/JT front axle tube. Castings are known to be delicate to impact loads and being that impacts of the axle is invevitable off road, protection is a must. The EVO MFG JL/JT CAD adds much needed protection by retaining the partial factory skid plate and adding an addtional 3/16” steel full coverage skidplate not only protecting the FAD casting and wiring harness but also extending forward to protect the highly vulnerable front steering stabilizer. The EVO MFG CAD/FAD Skid comes fully welded, powder coated black and ready to install with standard tools in a few simple minutes.

Jeep Gladiator Rear High N Tight Rear Bumper. High Clearance Gladiator Bumper

Jeep Gladiator High Clearance Rear Bumper with D Ring Shackle Tabs Jeep JT Gladiator Rear High Clearance Bumper Simple Bolt on installation. This high clearance bumper is designed to reduce the Gladiator’s tendency to drag the rear bumper off road giving many inches of gained clearance over stock and aftermarket bumpers. Tight to the tailgate, low profile high from the ground. If you wheel your gladiator, this is the bumper for you. Receiver option is Jeep backup sensors/park assist compatible. INSTALLATION TIME 1-2 HOURS *Bumpers with welded seams (not sanded/ground) ready for contour grinding and/or paint/powder coat to your specific color. Some images may be shown with installer contour ground welds. *Optional Black Powder Coat available (with welded non ground seams) *Standard Bumper is Not compatible with Jeep Park Assist Back Up Sensors. (Will work on park assist equipped vehicles, park assist will be disabled). *Receiver Option (2”) is currently NOT RATED FOR TOWING. (Used for Recovery and/or Bike Racks, Kayak Mounts, Baskets and other accessories) Factory Spare Tire will be unaffected Optional JT License Plate Relocate sold separately EVO-3121B On Rubicon: Rear Corner Guard can be installer trimmed/capped (as seen in pictures) or removed. Powdercoated bumpers are offered as a convenience. We do not cover finish/powdercoating under warranty. All our bumper/tire Carrier products are also available in raw metal for local treatment specific to your area needs.

Jeep Wrangler PROTEK AUTO TRANSMISSION SKID JK/JKU 2007 2008 2009 2010 2011

EVO MFG 2007-2011 JK 3.8L Transmission Skid (Auto) BLK 100% Bolt on with factory hardware. Powder coated black. Can be used independently or with entire system. Notes: Automatic Transmission Only INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler JK PROTEK REAR SHOCK SKIDS 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

EVO MFG 2007-2018 Jeep Wrangler JK / JKU ProTek Rear Shock Skids The lower rear shock and control arm mount on the JK is the lowest and most vulnerable component for impact and damage while on the trail. The EVO MFG ProTek Rear Shock Skid gives the strength and protection needed to help protect your expensive and important suspension components. Fully bolt on with no required cutting or welding, this skid boxes in the rear control arm and shock mount with 3/16” steel and offers ramping flat skids to help you slide off obstacles and not get hang up. Comes with both driver and passenger sides skids, powder coated black for corrosion protection. DOWNLOAD PDF INSTRUCTIONS: EVO-1196B.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler JL/Gladiator PRO Alumilite Hoop

Jeep Wrangler JL/Gladiator PRO Alumilite Hoop Jeep Wrangler JL/Gladiator PRO Alumilite Hoop DOWNLOAD PDF INSTRUCTIONS: EVO-3112AL.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

2007-2018 Jeep Wrangler PROTEK EXHAUST /TRANNY CROSS-MEMBER SKID FOR JK/JKU

EVO MFG ProTek JK Exhaust Skid *Fits all year JKs (2012 included) 3/16” Steel Skid Protects Exhaust Crossover and the exhaust loop on 2012 JKs Protect the expensive to replace factory transmission crossmember 100% Bolt On with factory and supplied hardware Works on both Manual and Automatic JKs Powdercoated Black Notes: EVO-1093B not compatible with LONG ARM Kits (Weight: 30lbs) INSTALLATION TIME 1-2 HOURS WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

GATE PLATE VENT DELETE (BLACK) JK/JKU

EVO MFG Jeep JK Gate Plate Vent Delete Pre-Drilled license plate mounting points Fits 2007 to current Jeep JK/JKU Texture powdercoated steel construction and easy install using factory hardware Factory Vent baffle removal required. Cabin will still vent Works with both wide and tall tailgate vents

2007-2011 Jeep Wrangler PROTEK CONNECTION SKID (AUTO TRANS) JK/JKU

EVO MFG 2007-2011 JK 3.8L Skid Connection BLK Requires Oil and Transmission skid to mount 3/16” Steel Skid 100% Bolt-on with supplied hardware Bridges gap between Oil Pan Skid and Auto Transmission Skid Powder coated black Notes: Requires EVO-1101B and EVO-1102B to mount, Optional Equipment, Automatic Transmission only INSTALLATION TIME 0.5-1 HOUR WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler 392 & JT Gladiator Mojave A Pillar Cowl Ditch Light Mounts, Pair Black

EVO-3161B Jeep Wrangler 392 & Gladiator Mojave A Pillar Cowl Ditch Light Mounts, Pair Black Simple bolt on install to 2018-2024 Jeep Wrangler 392 and 2020-2024...

4 DOOR ROCK SLIDERS (RAW) FOR JK Wrangler

EVO 4 Door RockSliders, Raw EVO MFG RockSliders are manufactured from 3/16-inch laser-cut steel plate and 1.75OD x .120 DOM Tubing. They weld on to the factory frame of the JK to protect the sides and under body from trail damage. The EVO RockSliders are strong enough to support the weight of the vehicle and can be used as a jacking point for a Hi-Lift Jack. The EVO RockSliders offer a sleek, low profile design that will compliment and protect 4 Door Jeep Wrangler JKs. EVO MFG RockSliders are available in bare steel so they can be paint-matched to your vehicle once installed. **** Sliders ship bare metal with welded seams ready for contour grinding and/or paint. *** • Proudly Made in the USA • Manufactured from 3/16-inch laser-cut steel plate, 1.75OD x .120 Wall DOM Tubing • Designed to protect the JK’s stock body panels • Weld-on installation • Designed to work with all Short Arm Suspension kits without Modification Note: EVO 4 Door Sliders work with EVO Long Arm kit.

Jeep Wrangler HD PROTEK TRANSMISSION CROSSMEMBER JK (RAW) 2012 2013 2014 2015 2016 2017 2018

EVO MFG 2012-2018 HD ProTek Transmission Crossmember JK (RAW) The factory JK Transmission crossmember is weak and volernable to damage being that it is mostly unprotected and the lowest part of the chassis. It is also expensive to replace with factory components. The EVO MFG HD Crossmember addresses this with a 3/16” plate steel construction, laser cut and CNC formed alternative the is significantly stronger and much more cost effective than a factory replacement. Best of both worlds, Cheaper and stronger. Its shape is the same as factory and includes all threaded inserts for retention off all factory and aftermarket skid plates. Fully boxed constuction for 2012+ model year Jeep Wrangler JK/JKU Section welded to keep a truer part, minimizing heat warp Easy install, No cutting or drilling required Raw finish INSTALLATION TIME 1-2 HOURS DOWNLOAD PDF INSTRUCTIONS: EVO-1145.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Jeep Wrangler JL/Gladiator PRO Front Alumilite Bumper Skid

Jeep Wrangler JL/Gladiator PRO Front Alumilite Bumper Skid Jeep Wrangler JL/Gladiator PRO Front Alumilite Bumper Skid DOWNLOAD PDF INSTRUCTIONS: EVO-3114AL.pdf WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.